Finally finished

So here it is still wet from the paint (MG zeta is standing on a piece of plastic to keep it nice and clean).
Well as you can see its pretty big, the MG zeta inside is to give you an idea of the size.
enjoy the pictures and i hope it will give sme of you an idea how to build it (or not lol)




I used matt white paint from a store called Praxis, it was there on paint (the cheapest one) and clear filler for the edges of the plexiglas.




All with all it was nice to build, i had a lot of help from my brother (thanks).
And the total kost was about 80-90 euro, it could be cheaper.
i bought the plexiglas called lexaan wich is many times stronger than glass and the stuff is pretty expensive.
the plexiglas that i was looking for was not for sale in the correct thicknes.
i hoped you enjoyd following this tiny project.

Almost done.

So here are the well promest photo's of my airbrush cabine.
In my opinion it looks really good, it ain't small but i have enough space in it to work on my models with the airbrush. I need to paint the complete cabine to make it look at its best. The cabine is going to be white on the inside and outside. And maybe when im more handy with the airbrush, i will make a drawing with my airbrush on the outside of the cabine. But thats only if im more capable of using the airbrush.


Well here are some nice fresh photo's just made :



This is a photo taken from the front i used pretty much bit's and bolts to put it together. As you can see i did nt remove the protective foil from the plexiglas, i did this because om gonna paint the wood inside and outside. When im painting it the plexiglas will be protected by the foil. When it will be operational i will remove the foil.



Here you can see the side. I drilled more holes in the metal than needed so there are some holes left. The metal is 6 cm wide 1 mm thick and 40 cm high. The metal will also be painted so it wont rust. (my airbrush paint is water based).



Here you can see the backside of the cabine. I made a tiny hole above the fan for the electricity wire.



I made a detailed photo of the bottom side. You can see a bolt with a round head put upside down. This functions as a feet that doesnt damage the surface under the cabine.



And last but not least a close up of the fan. You can see the cable going to the outside (the cable has an on/off switch). The 2 bolts wich are visible in the front are to be taken off, then you can put a filter behind it and put the round plastic part against it. Put the 2 bolts on it and tighten them and the cabine is ready for use.


Well this is it for so much. I will paint it and put some clear silicon filler on the edges of the plexiglas, after thats done i will make a photo with a MG gundam in it so you can see the actual size of it. For more details please ask.

airbrush filtercabine

Its almost done, i will finish it this weekend. there 4 things left to do.
and these are the 4 things :
-Put 2 little bolts under the bottom for standing.
-Mount the plexiglas.
-Make the edges in the inside airtight.
-Mount a filter in front of the fan.

If this is finished i will continu on my GM group-build project.
When the cabine is finished i will make some photo's of it.

General update

Well here is a general update on the project's im busy with. No photo's on this update (sorry will make some soon for you). Last weekend i was away on a mini vacation in England, i was planning on doing the update before the weekend but did'nt make it.

The zaku project is going not as good as i wanted. It is taking more time than i hoped and some parts are really a pain in the ass to mod. This is gonna be a time taking project and im thinking of doing other projects in between.
Whats done ? :
-head with led 80 %
-torso with real cockpit 70 %
-waist and hips 40 %
-legs 90 %
-arms 20%
-backpack 0 %
-weapon - beam staff/axe 0 %

For the group-build project the time is less of a problem. I've got all the parts i need for th project. Also im thining of using the gm as a test model for the airbrush. just the easy stuff no weathering or stuff like that. I will do this project before continuing the zaku.

The spray cabin is going pretty good. im building it with my brother and he will make some parts for it on his work. it will make the spray cabin stronger and better. The parts he's making are connecting the wood with the transparant plastic.

Wel thats all for this update if you have any questions or something like that please ask them.